HI-TECH MACHINERIES - AHMEDABAD
- Home
- Hi-tech Machineries
- Tray Dryer
Tray Dryer
Product Specification
Designed for uniform circulation of hot air in the drying chamber. Electrical / Steam / Oil Heating mode.
Inside surface is painted with heat resistant aluminum paint and out side with synthetic enamel.
cGMP models with SS 316 Construction, Single page design fully washable type models available.
Inside of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.
Construction
External Tray Dryer: 2mm Thick internal: 2mm Thick moc: cGMP
Surface Finish
External Tray Dryer: Buffed to 150 grit matt finish Internal Tray Dryer: Buffed to 220 grit mirror finish.
Inlet & Outlet:
All Tray dryers have a 5 micron pre filter at the inlet and a manually infinite adjustable damper at the outlet.
Door:
Doors at provided at the front and / or rear side of the dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors of Tray dryer.
Air Circulation:
Air circulation is done by specially designed recirculation blowers inside the Tray dryer. The blower capacity, static & design depends on the size and model of dryer.
Heating:
Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the tray dryers.
Temperature Control
Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
Trays:
Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with coved corners. Trays are buffed to mirror finish. Trays are also available in aluminum / Polypropylene / Frp/ M.S. galvanized as per clients requirements.
Trolley:
Trolley is provided in the tray dryers to accommodate trays in it. Trolley trucks are used to load and unload the trays into the dryer.
Control Panel:
Automatic Control panel is fitted on the side of the dryer. If consists of Starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.
Technical Specifications:
| MODELS | TD-12 | TD-24 | TD-48 | TD-96 | TD-192 |
| Loading capacity | 12 Trays | 24 Trays | 48 Trays | 96 Trays | 192 Trays |
| External Dimension W D H in mm | 1370X530X940 | 1370X940X940 | 1980X1020X1880 | 3320X1900X1880 | 3320X1900X1880 |
| Internal Dimension In mm | 840X430X840 | 840X860X840 | 1020X930X1830 | 1960X930 X1830 | 1960X930X1830 |
| No of Doors | One | One | One | Two | Two |
| No of Blowers | One | Two | One | Two | Four |
| No of motors/H.P.3 PHASE 415 VOLTS. | 1/0.5 H.P.3 phase 415 volts | 1/0.5 H.P.3 phase 415 volts | 1/1 H.P.3 phase 415 volts | 2/1 H.P.3 phase 415 volts | Four/1 H.P.each3 phase 415 volts |
| Electrical Heating Load for 100°C/200°C /300°C |
3kw/6kw/9kw | 6kw/9kw/12kw | 9kw/15kw/18kw | 15kw/21kw/27kw | 36kw/42kw/48kw |
| Steam Heater No. of coils. | 2 | 2 | 2 | 2 | 2 |
| Steam Pressure | 3.3 kg/cm2 | 3.3 kg/cm2 | 3.3 kg/cm2 | 3.3 kg/cm2 | 3.3 kg/cm2 |
| Steam consumption | 25 LBS/hr | 45 LBS/hr | 60 LBS/hr | 80 LBS/hr | 120 LBS/hr |
| Insulation in mm 100°C/ 200°C/ 300°C | 50/75/75 | 50/75/75 | 50/75/75 | 50/75/75 | 50/75/75 |
| No of Trolleys | Rack System | Rack System | One | Two | Four |
| Tray Size | 812X 406 X 31 | 812X 406 X 31 | 812X 406 X 31 | 812X 406 X 31 | 812X 406 X 31 |
| Trolley Dimension | Fixed Racks | Fixed Racks | 840X960X1780 | 840X960X1780 | 840X960X1780 |
Related Products
Also Listed In
