Monoblock Inner Plugging Screw Capping Machine
Features:
- Parts coming in contact with the Plastic bottle / Screw Plastic cap / exposed to the atmosphere are made out of S.S 304.
- Star wheel and back guide set are made of Nylon material for long lasting life.
- Single motor synchronizes conveyor, star wheels and platform turret and speed can be varied by the % speed pot on operating panel.
- Inner plugging and Screw capping can be performed on single star wheel so reducing the machine foot print as well as man power to operate.
- A Special clutch device is incorporated in Star wheel system for stoppage of machine in the event of bottle is over turned or over diameter.
- Imported photo sensing device to stops machine automatically in the event of no plastic screw cap in delivery chute.
- Specially designed vibrator and bowl for inner plug
- Specially designed orient or for screw caps.
- Jaw type screw capping head.
specification:
MODEL NO. NKISC-60M
|
Direction
|
Left To Right.
|
Electrical Supply
|
2.00 HP
|
Output
|
40 -50 bottle / Minute
|
No of Sealing Head
|
1 inner cap Pneumatic head + 1 Screw cap head
|
Power Requirement
|
440 Volts, 3 Phase 50 Hz.
|
Height of Conveyor
|
Adjustable from 800 To 850 MM
|
Dimensions
|
1830 mm (L) X 915 mm (W) X 1530 mm (H)
|
Machine working:
- NKISC-60M, a Monoblock machine is a compact model used to carry out two operations simultaneously means inner plugging and screw capping on Round container.
- Bottles are continuously fed from upstream machine to the flat conveyor belt of machine and transferred to the in feed star wheel.
- Inner plug and screw cap are kept in vibrator unit and orientation unit respectively.
- First pneumatic head perform the Inner plugging operation and then bottle move on star wheel and screws capping head comes downside and perform the screw capping operation.
- After sealing operation, sealing head moves upward with help of cam and bottle /jars move with exit star wheel and Move further on conveyor belt for next operation.
Related Products